Ldap auth ok

Almost work and disable EAP
Move and regenerate dev keys
2025-07-21 00:45:54 +03:00 · 2025-07-20 15:58:54 +03:00 · 2025-07-19 21:09:14 +03:00 · 2025-07-19 17:01:59 +03:00 · 2024-12-15 16:33:42 +03:00 · 2024-12-15 13:57:57 +03:00
30 changed files with 4805 additions and 69 deletions
@@ -1,2 +1,2 @@
-/privkey.pem
-/chap-secrets
+/chap-secrets
+/keys/
@@ -37,4 +37,9 @@ openssl req -new -key privkey.pem -out sstp-csr.csr
 ### Create a server certificate
 ```bash
 openssl x509 -req -in sstp-csr.csr -CA ca.pem -CAkey rootCA.key -CAcreateserial -out cert.pem -days 365
-```
+```
+
+### Convert cert from PEM to CERT format (if it's needed)
+```bash
+openssl x509 -outform der -in your-cert.pem -out your-cert.crt
+```
@@ -1,6 +1,6 @@
 [modules]
-#log_syslog
 log_file
+radius
 pptp
 sstp
 auth_pap
@@ -8,11 +8,10 @@ auth_chap_md5
 auth_mschap_v1
 auth_mschap_v2
 chap-secrets
-ippool
+#ippool
 ipv6_nd
 ipv6_dhcp
 ipv6pool
-#iprange
 pppd_compat

 [common]
@@ -22,16 +21,21 @@ single-session=replace
 chap-secrets=/etc/ppp/chap-secrets

 [ppp]
-verbose=5
+verbose=1
 mtu=1550
 mru=1550
 accomp=allow
 pcomp=allow
 ipv4=prefer
-ipv6=allow
+ipv6=prefer
+ipv6-intf-id=random
+ipv6-peer-intf-id=calling-sid
+ipv6-accept-peer-intf-id=1
 lcp-echo-interval=30
 lcp-echo-failure=3
 lcp-echo-timeout=5
+unit-preallocate=1
+unit-cache=10


 [client-ip-range]
@@ -40,9 +44,8 @@ lcp-echo-timeout=5

 [sstp]
 port=443
-verbose=5
-#accept=proxy,ssl
-accept=ssl
+verbose=0
+accept=ssl,proxy
 ssl-pemfile=/etc/cert.pem
 ssl-keyfile=/etc/privkey.pem
 ssl-ca-file=/etc/ca.pem
@@ -54,27 +57,40 @@ ip-pool=v4pool
 ipv6-pool=v6pool
 pv6-pool-delegate=v6pool-delegate

+[radius]
+dictionary=/usr/share/accel-ppp/radius/dictionary
+verbose=1
+interim-verbose=1
+server=fc00:b10c:4::eeee,secret123,auth-port=1812,acct-port=1813,req-limit=0,fail-time=0
+gw-ip-address=192.168.95.1
+
 [dns]
 dns1=8.8.8.8

-[ip-pool]
-gw-ip-address=192.168.95.1
-tunnel=192.168.95.2-254,v4pool
-192.168.95.0/24,v4pool
+#[ip-pool]
+#gw-ip-address=192.168.95.1
+#tunnel=192.168.95.2-254,v4pool
+#192.168.95.0/24,v4pool

 [ipv6-dns]
 dns=2001:4860:4860::8888

 [ipv6-pool]
-gw-ip6-address=fc00:b10c:0::
+#gw-ip6-address=fc00:b10c:3::ffff
 fc00:b10c:0001::/48,64,name=v6pool
+
 fc00:b10c:0002::/48,64,name=v6pool-delegate
+delegate=fc00:b10c:0002::/48,64

 [ipv6-nd]
 verbose=1
+AdvManagedFlag=1
+
+[ipv6-dhcp]
+verbose=1
+route-via-gw=1

 [log]
-#level=4
 level=5
 log-file=/dev/stdout
 log-debug=/dev/stdout
@@ -1,25 +0,0 @@
-----BEGIN CERTIFICATE-----
-MIIENzCCAx+gAwIBAgIUGIR7o8sMQBKIJFUEoTc4GDivuFUwDQYJKoZIhvcNAQEL
-BQAwgaoxCzAJBgNVBAYTAnJ1MRkwFwYDVQQIDBBTYWludC1QZXRlcnNidXJnMRkw
-FwYDVQQHDBBTYWludC1QZXRlcnNidXJnMRswGQYDVQQKDBJUZXJla2hpbiBBbGV4
-YW5kZXIxDDAKBgNVBAsMA2RldjEbMBkGA1UEAwwSVGVyZWtoaW4gQWxleGFuZGVy
-MR0wGwYJKoZIhvcNAQkBFg5hbGV4QGJlYXJucy5tZTAeFw0yNDA4MTYxMTI0NDha
-Fw0yNzA2MDYxMTI0NDhaMIGqMQswCQYDVQQGEwJydTEZMBcGA1UECAwQU2FpbnQt
-UGV0ZXJzYnVyZzEZMBcGA1UEBwwQU2FpbnQtUGV0ZXJzYnVyZzEbMBkGA1UECgwS
-VGVyZWtoaW4gQWxleGFuZGVyMQwwCgYDVQQLDANkZXYxGzAZBgNVBAMMElRlcmVr
-aGluIEFsZXhhbmRlcjEdMBsGCSqGSIb3DQEJARYOYWxleEBiZWFybnMubWUwggEi
-MA0GCSqGSIb3DQEBAQUAA4IBDwAwggEKAoIBAQC9WtUf+He0fGLXp7ywkhS/FFif
-OJiGMqUbadXy+NFM1BcABLpBbhuYUjDa4UA31629L0p0MgZdVSXLxWiY12C6nNDF
-/HqwP8ez4Pgtf+nnAubPvtUL+KcndMWmY9RFmadSuHwLX5JDvBmxqP2CpWj3J7O0
-k2ndrpgv6I26rFVuB5Gu/tYmjDayz1FEnWKIMzhV+zCZ27hbwVRs+9NzSbOOPz5Z
-dVhlpbXw9mIDyoUjVc51nt00QdeacJ4csFVC1F8DQ1eIXDTg+clFBSy7L4NRWQfc
-uIkkbB+4kYmC6lv0QMM0lMZ3WbTy5BdyVVW+/QmGk29qLxvLJJlv000ZKTURAgMB
-AAGjUzBRMB0GA1UdDgQWBBTtL0OU6B+NvQTn4zpJHtBCfMB7xDAfBgNVHSMEGDAW
-gBTtL0OU6B+NvQTn4zpJHtBCfMB7xDAPBgNVHRMBAf8EBTADAQH/MA0GCSqGSIb3
-DQEBCwUAA4IBAQBe8G+h+5O1Exoj298kW3Nczoi2Mxr2SIpi9AQvuhYzYkQoFBSA
-0t6GS7WU1rQFXrO0SWedWL2iasX5V4wxK+YXP92hH0Wg0UnUmdKkkhcQRm7Yivo5
-YdZYgx2yb9HGZ7cGn6if26k6R/pm9dWkk93rTVrDwBxho74kTA4nq1D7aYTn3qMS
-FzFPehVKBGjLzuWoujlythKL0rLQL8YXEfQ+wYt6pX3bEyJnrGtImZwhMUK1gX90
-mgb+dhbPV7d7I9UTb9lx2OG5FyOAzOHiZbX2M1/wxOhQvnch6xwxwnJqd4iK1Aec
-/i9ntiVcf2oWfw27DXsIBJbiUXJh6349yC39
-----END CERTIFICATE-----
@@ -0,0 +1 @@
+./keys/ca.pem
@@ -1,23 +0,0 @@
-----BEGIN CERTIFICATE-----
-MIIDyjCCArICFDCD8Puy2rJtSajwPYUNuOHnM5tUMA0GCSqGSIb3DQEBCwUAMIGq
-MQswCQYDVQQGEwJydTEZMBcGA1UECAwQU2FpbnQtUGV0ZXJzYnVyZzEZMBcGA1UE
-BwwQU2FpbnQtUGV0ZXJzYnVyZzEbMBkGA1UECgwSVGVyZWtoaW4gQWxleGFuZGVy
-MQwwCgYDVQQLDANkZXYxGzAZBgNVBAMMElRlcmVraGluIEFsZXhhbmRlcjEdMBsG
-CSqGSIb3DQEJARYOYWxleEBiZWFybnMubWUwHhcNMjQxMjA5MDAwNDAzWhcNMjUx
-MjA5MDAwNDAzWjCBlzELMAkGA1UEBhMCcnUxGTAXBgNVBAgMEFNhaW50LVBldGVy
-c2J1cmcxGTAXBgNVBAcMEFNhaW50LVBldGVyc2J1cmcxGzAZBgNVBAoMElRlcmVr
-aGluIEFsZXhhbmRlcjEWMBQGA1UEAwwNYXBpLmJlYXJucy5tZTEdMBsGCSqGSIb3
-DQEJARYOYWxleEBiZWFybnMubWUwggEiMA0GCSqGSIb3DQEBAQUAA4IBDwAwggEK
-AoIBAQCv89+4KbomK6lpTniHgR4Li8eiEe2cyTuJW6bz0rgYZmUhO/4OKM5Hlv+w
-s73KPDlMEd3PJnanwnw36MTqoGcfmMqsv6jxq3U/Esjua5lR4+m8JFBV2ESrB5vM
-8x2EnSBbmLhijEBSf+C60pIWMxRLhml7P9J5SaSi0ksPGE0Efzse6uICYnXi3ApR
-L8hqQ0Hu2/yBIcJR/4VepkP9riHAnnBLRtXlRo0Y3mSrQaCgd+cx4qp3gKF6BbJK
-MivT2rgah/7kZIXwUigp3U4OCRIQ8HydpI4UozJNj9StDG96MysdzSzv5vwipcVw
-WbsaJVfSuJ4i4QoaSvnjVfE8ChldAgMBAAEwDQYJKoZIhvcNAQELBQADggEBALx8
-/3Sdy+gz+Yguu9acInU5AbJ+GtJMn0QSXgXTa/R+2ShCF7kfV7tRh8RPI6mZc83M
-UGYDJG6VXbFc6eSB2H2Hy0aWkp/2+glNCPXKk707FIK4Ww2jwJUqHcs9GYEchekL
-7C8PLXBK8GjErtONZhi8Q5yMPFsi+2l1Nze6hHbOfPqTXjDU+qixo5hJjQZRg12i
-FPQxs7eH+30V7fbr88DAI+NcHwaGmJF8xT7g3dLFdwqXkQuGHa7PjNescKry6tg2
-Y8nd5xi8F815yL9k5Vj8zvOn5FRZrXb1M7+DRr3YsG5AwdgLJTfdpFoXSY0anTyI
-HfSSA70qcRa6IJRVon8=
-----END CERTIFICATE-----
@@ -0,0 +1 @@
+./keys/cert.pem
@@ -11,10 +11,90 @@ services:
      - ./ca.pem:/etc/ca.pem:ro
    expose:
      - "443/tcp"
-    ports:
-      - "443:443/tcp"
    devices:
      - "/dev/ppp:/dev/ppp:rwm"
-
+    environment:
+      VIRTUAL_HOST: "api.bearns.me"
+      VIRTUAL_PROTO: "https"
+      VIRTUAL_PORT: 443
    cap_add:
-      - NET_ADMIN
+      - NET_ADMIN
+    networks:
+      proxy-tier:
+        ipv6_address: "fc00:b10c:3::ffff"
+      radius-net:
+        ipv6_address: "fc00:b10c:4::ffff"
+    sysctls:
+      - net.ipv6.conf.default.disable_ipv6=0
+
+  radius:
+    build: ./radius
+    networks:
+      radius-net:
+        ipv6_address: "fc00:b10c:4::eeee"
+
+  ldap:
+    build: ./ldap
+    volumes:
+      - ldap:/var/lib/ldap
+      - ldap-cfg:/etc/ldap/slapd.d
+    networks:
+      radius-net:
+
+  stream:
+    build: ./nginx-stream
+    volumes:
+      - ./ca.pem:/etc/nginx/certs/chain.pem:ro
+      - ./cert.pem:/etc/nginx/certs/api.bearns.me/fullchain.pem:ro
+      - ./privkey.pem:/etc/nginx/certs/api.bearns.me/key.pem:ro
+    expose:
+      - "443/tcp"
+    ports:
+      - "443:443/tcp"
+    environment:
+      SNI_NAME: "api.bearns.me"
+    networks:
+      - proxy-tier
+
+  proxy:
+    build: ./proxy
+    volumes:
+      - ./cert.pem:/etc/nginx/certs/cert.pem:ro
+      - ./privkey.pem:/etc/nginx/certs/privkey.pem:ro
+    expose:
+      - "443/tcp"
+    networks:
+      - proxy-tier
+
+  phpldapadmin:
+    image: phpldapadmin/phpldapadmin
+    environment:
+      LDAP_HOST: "ldap"
+      LDAP_BASE_DN: "dc=bearns,dc=me"
+      LDAP_USERNAME: "cn=admin,dc=bearns,dc=me"
+      LDAP_LOGIN_OBJECTCLASS: "posixAccount,inetOrgPerson"
+      LDAP_ALLOW_GUEST: true
+      LDAP_PASSWORD: "WlnTd9_mtw5-4"
+    ports:
+      - "8080:8080"
+    networks:
+      - radius-net
+
+networks:
+  proxy-tier:
+    enable_ipv6: true
+    ipam:
+      config:
+        - subnet: fc00:b10c:3::/64
+  radius-net:
+    enable_ipv6: true
+    ipam:
+      config:
+        - subnet: fc00:b10c:4::/64
+
+volumes:
+  certs:
+  vhost.d:
+  html:
+  ldap:
+  ldap-cfg:
@@ -0,0 +1,18 @@
+FROM osixia/openldap:1.5.0
+# USE THIS VARIABLES IN .ldif files
+#    {{ LDAP_BASE_DN }}
+#    {{ LDAP_BACKEND }}
+#    {{ LDAP_DOMAIN }}
+#    {{ LDAP_READONLY_USER_USERNAME }}
+#    {{ LDAP_READONLY_USER_PASSWORD_ENCRYPTED }}
+ADD ./*.ldif /seed/ldif/
+ADD ./*.schema /seed/schema/
+ENV LDAP_ORGANISATION="ATerekhin test domain"
+ENV LDAP_DOMAIN="bearns.me"
+ENV LDAP_ADMIN_PASSWORD="WlnTd9_mtw5-4"
+ENV LDAP_TLS=false
+ENV LDAP_READONLY_USER=true
+ENV LDAP_OPENLDAP_GID=911
+ENV LDAP_OPENLDAP_UID=911
+ENV LDAP_SEED_INTERNAL_LDIF_PATH="/seed/ldif/"
+ENV LDAP_SEED_INTERNAL_SCHEMA_PATH="/seed/schema/"
@@ -0,0 +1,19 @@
+# LDIF Export for cn=uid001,dc=bearns,dc=me
+# Server: LDAP Server (ldap://ldap:389)
+# Total Entries: 1
+#
+# Generated by PLA (http://localhost:8080) on July 20, 2025 8:27 pm
+# Exported by Anonymous
+# Version: v2.2.2-rel-ae0dc2e5
+
+version: 1
+# Entry 1: cn=uid001,dc=bearns,dc=me
+dn: cn=uid001,dc=bearns,dc=me
+cn: uid001
+objectClass: person
+objectClass: uidObject
+objectClass: radiusProfile
+radiusFramedIPAddress: 192.168.95.2
+sn: Test user
+uid: user001
+userPassword: 12345678
@@ -0,0 +1,13 @@
+dn: cn=freeradius-clients,cn=schema,cn=config
+objectClass: olcSchemaConfig
+cn: freeradius-clients
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.1.1.1.1 NAME 'freeradiusClientIdentifier' DESC 'Client Identifier' EQUALITY caseIgnoreMatch ORDERING caseIgnoreOrderingMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.1.1.1.2 NAME 'freeradiusClientShortname' DESC 'Client Shortname' EQUALITY caseIgnoreMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.1.1.1.3 NAME 'freeradiusClientType' DESC 'Client Type' EQUALITY caseIgnoreMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.1.1.1.4 NAME 'freeradiusClientComment' DESC 'Client comment' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.1.1.1.5 NAME 'freeradiusClientGroupDN' DESC 'Client group membership' EQUALITY distinguishedNameMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.12 )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.1.1.1.6 NAME 'freeradiusClientIpV4Binding' DESC 'Client should only be able to access the server from this IPv4 address.' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.1.1.1.7 NAME 'freeradiusClientIpV6Binding' DESC 'Client should only be able to access the server from this IPv6 address' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.1.1.1.8 NAME 'freeradiusClientRegion' DESC 'Client region' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
+olcObjectClasses: ( 1.3.6.1.4.1.11344.4.1.1.2.1 NAME 'freeradiusClient' DESC 'freeradiusClient object class' SUP top STRUCTURAL MUST freeradiusClientIdentifier MAY ( freeradiusClientShortname $ freeradiusClientType $ freeradiusClientComment $ freeradiusClientGroupDN $ freeradiusClientIpV4Binding $ freeradiusClientIpV6Binding $ freeradiusClientRegion ) )
+olcObjectClasses: ( 1.3.6.1.4.1.11344.4.1.1.2.2 NAME 'freeradiusAccessDevice' DESC 'freeradiusAccessDevice object class' SUP top STRUCTURAL MUST freeradiusClientIdentifier MAY ( freeradiusClientShortname $ freeradiusClientType $ freeradiusClientComment ) )
@@ -0,0 +1,100 @@
+#
+# freeradiusClient is a structural object which provides the base object for all freeradius clients.
+# Only attributes which are common to all clients are provided by this object.
+#
+# freeradiusClient objects may be extended by AUX objects like radiusClient to add protocol specific
+# attributes like radiusSecret.
+#
+# 11344.4.1.1.[1|2]
+# |     | | |   |_ 1. Client attributes. .2 Client objects
+# |     | | |_ Clients
+# |     | |_ Internal
+# |     |_ LDAP Attributes
+# |_ Vendor
+#
+attributetype ( 1.3.6.1.4.1.11344.4.1.1.1.1
+	NAME 'freeradiusClientIdentifier'
+	DESC 'Client Identifier'
+	EQUALITY caseIgnoreMatch
+	ORDERING caseIgnoreOrderingMatch
+	SUBSTR caseIgnoreSubstringsMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.1.1.1.2
+	NAME 'freeradiusClientShortname'
+	DESC 'Client Shortname'
+	EQUALITY caseIgnoreMatch
+	SUBSTR caseIgnoreSubstringsMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.1.1.1.3
+	NAME 'freeradiusClientType'
+	DESC 'Client Type'
+	EQUALITY caseIgnoreMatch
+	SUBSTR caseIgnoreSubstringsMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.1.1.1.4
+	NAME 'freeradiusClientComment'
+	DESC 'Client comment'
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.1.1.1.5
+	NAME 'freeradiusClientGroupDN'
+	DESC 'Client group membership'
+	EQUALITY distinguishedNameMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.12
+  )
+
+attributetype ( 1.3.6.1.4.1.11344.4.1.1.1.6
+	NAME 'freeradiusClientIpV4Binding'
+	DESC 'Client should only be able to access the server from this IPv4 address.'
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.1.1.1.7
+	NAME 'freeradiusClientIpV6Binding'
+	DESC 'Client should only be able to access the server from this IPv6 address'
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.1.1.1.8
+	NAME 'freeradiusClientRegion'
+	DESC 'Client region'
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+	SINGLE-VALUE
+ )
+
+objectclass ( 1.3.6.1.4.1.11344.4.1.1.2.1
+	NAME 'freeradiusClient'
+	DESC 'freeradiusClient object class'
+	SUP top
+	STRUCTURAL
+	MUST ( freeradiusClientIdentifier )
+	MAY ( freeradiusClientShortname $ freeradiusClientType $ freeradiusClientComment $ freeradiusClientGroupDN $ freeradiusClientIpV4Binding $ freeradiusClientIpV6Binding $ freeradiusClientRegion )
+ )
+
+#
+# Similar to a freeradiusClient, but uses an alternative identifier, and represents a device which
+# doesn't communicate directly with the RADIUS server.
+#
+objectclass ( 1.3.6.1.4.1.11344.4.1.1.2.2
+	NAME 'freeradiusAccessDevice'
+	DESC 'freeradiusAccessDevice object class'
+	SUP top
+	STRUCTURAL
+	MUST ( freeradiusClientIdentifier )
+	MAY ( freeradiusClientShortname $ freeradiusClientType $ freeradiusClientComment )
+ )
@@ -0,0 +1,4 @@
+dn: cn=freeradius-policy,cn=schema,cn=config
+objectClass: olcSchemaConfig
+cn: freeradius-policy
+olcObjectClasses: ( 1.3.6.1.4.1.11344.4.1.2.2.1 NAME 'freeradiusPolicy' DESC 'A Container Objectclass containing one or more types of <protocol>Profile' SUP top STRUCTURAL MUST cn )
@@ -0,0 +1,15 @@
+#
+# 11344.4.1.2.[1|2]
+# |     | | |   |_ .1 Profile attributes, .2 profile objects
+# |     | | |_ Profile
+# |     | |_ Internal
+# |     |_ LDAP Attributes
+# |_ Vendor
+#
+objectclass ( 1.3.6.1.4.1.11344.4.1.2.2.1
+	NAME 'freeradiusPolicy'
+	DESC 'A Container Objectclass containing one or more types of <protocol>Profile'
+	SUP top
+	STRUCTURAL
+	MUST cn
+ )
@@ -0,0 +1,22 @@
+dn: cn=freeradius-radacct,cn=schema,cn=config
+objectClass: olcSchemaConfig
+cn: freeradius-radacct
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.3.1.66 NAME 'radiusAcctAuthentic' DESC '' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.3.1.67 NAME 'radiusAcctInputOctets' DESC '' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.3.1.68 NAME 'radiusAcctInterval' DESC '' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.3.1.69 NAME 'radiusAcctOutputOctets' DESC '' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.3.1.70 NAME 'radiusAcctSessionId' DESC '' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.3.1.71 NAME 'radiusAcctSessionTime' DESC '' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.3.1.72 NAME 'radiusAcctStartTime' DESC '' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.3.1.73 NAME 'radiusAcctStopTime' DESC '' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.3.1.74 NAME 'radiusAcctTerminateCause' DESC '' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.3.1.75 NAME 'radiusAcctUniqueId' DESC '' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.3.1.76 NAME 'radiusAcctUpdateTime' DESC '' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.3.1.77 NAME 'radiusConnectInfoStart' DESC '' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.3.1.78 NAME 'radiusConnectInfoStop' DESC '' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.3.1.79 NAME 'radiusNASIdentifier' DESC '' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.3.1.80 NAME 'radiusNASPort' DESC '' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.3.1.81 NAME 'radiusNASPortId' DESC '' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.3.1.82 NAME 'radiusNASPortType' DESC '' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.3.1.83 NAME 'radiusUserName' DESC '' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
+olcObjectClasses: ( 1.3.6.1.4.1.11344.4.2.3.2.1 NAME 'radiusacct' SUP top AUXILIARY MAY ( radiusAcctAuthentic $ radiusAcctInputOctets $ radiusAcctInterval $ radiusAcctOutputOctets $ radiusAcctSessionId $ radiusAcctSessionTime $ radiusAcctStartTime $ radiusAcctStopTime $ radiusAcctTerminateCause $ radiusAcctUniqueId $ radiusAcctUpdateTime $ radiusConnectInfoStart $ radiusConnectInfoStop $ radiusNASIdentifier $ radiusNASPort $ radiusNASPortId $ radiusNASPortType $ radiusUserName ) )
@@ -0,0 +1,159 @@
+#
+# 11344.4.2.3.1
+# |     | | | |_ Accounting attributes (.1) accounting objects
+# |     | | |_ Accounting
+# |     | |_ RADIUS
+# |     |_ LDAP Attributes
+# |_ Vendor
+#
+attributetype ( 1.3.6.1.4.1.11344.4.2.3.1.66
+	NAME 'radiusAcctAuthentic'
+	DESC ''
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.3.1.67
+	NAME 'radiusAcctInputOctets'
+	DESC ''
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.3.1.68
+	NAME 'radiusAcctInterval'
+	DESC ''
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.3.1.69
+	NAME 'radiusAcctOutputOctets'
+	DESC ''
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.3.1.70
+	NAME 'radiusAcctSessionId'
+	DESC ''
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.3.1.71
+	NAME 'radiusAcctSessionTime'
+	DESC ''
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.3.1.72
+	NAME 'radiusAcctStartTime'
+	DESC ''
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.3.1.73
+	NAME 'radiusAcctStopTime'
+	DESC ''
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.3.1.74
+	NAME 'radiusAcctTerminateCause'
+	DESC ''
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.3.1.75
+	NAME 'radiusAcctUniqueId'
+	DESC ''
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.3.1.76
+	NAME 'radiusAcctUpdateTime'
+	DESC ''
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.3.1.77
+	NAME 'radiusConnectInfoStart'
+	DESC ''
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.3.1.78
+	NAME 'radiusConnectInfoStop'
+	DESC ''
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.3.1.79
+	NAME 'radiusNASIdentifier'
+	DESC ''
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.3.1.80
+	NAME 'radiusNASPort'
+	DESC ''
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.3.1.81
+	NAME 'radiusNASPortId'
+	DESC ''
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.3.1.82
+	NAME 'radiusNASPortType'
+	DESC ''
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.3.1.83
+	NAME 'radiusUserName'
+	DESC ''
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+	SINGLE-VALUE
+ )
+
+objectclass ( 1.3.6.1.4.1.11344.4.2.3.2.1
+	NAME 'radiusacct'
+	SUP top
+	AUXILIARY
+	MAY (  radiusAcctAuthentic $ radiusAcctInputOctets $ radiusAcctInterval $ radiusAcctOutputOctets $ radiusAcctSessionId $ radiusAcctSessionTime $ radiusAcctStartTime $ radiusAcctStopTime $ radiusAcctTerminateCause $ radiusAcctUniqueId $ radiusAcctUpdateTime $ radiusConnectInfoStart $ radiusConnectInfoStop $ radiusNASIdentifier $ radiusNASPort $ radiusNASPortId $ radiusNASPortType $ radiusUserName )
+ )
+
@@ -0,0 +1,80 @@
+dn: cn=freeradius-radius,cn=schema,cn=config
+objectClass: olcSchemaConfig
+cn: freeradius-radius
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.1 NAME 'radiusArapFeatures' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.2 NAME 'radiusArapSecurity' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.3 NAME 'radiusArapZoneAccess' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.44 NAME 'radiusAuthType' DESC 'controlItem: Auth-Type' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.4 NAME 'radiusCallbackId' DESC 'replyItem: Callback-Id' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.5 NAME 'radiusCallbackNumber' DESC 'replyItem: Callback-Number' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.6 NAME 'radiusCalledStationId' DESC 'controlItem: Called-Station-Id' EQUALITY caseIgnoreMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.7 NAME 'radiusCallingStationId' DESC 'controlItem: Calling-Station-Id' EQUALITY caseIgnoreMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.8 NAME 'radiusClass' DESC 'replyItem: Class' EQUALITY caseIgnoreMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.45 NAME 'radiusClientIPAddress' EQUALITY caseIgnoreMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.9 NAME 'radiusFilterId' DESC 'replyItem: Filter-Id' EQUALITY caseIgnoreMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.10 NAME 'radiusFramedAppleTalkLink' DESC 'replyItem: Framed-AppleTalk-Link' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.11 NAME 'radiusFramedAppleTalkNetwork' DESC 'replyItem: Framed-AppleTalk-Network' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.12 NAME 'radiusFramedAppleTalkZone' DESC 'replyItem: Framed-AppleTalk-Zone' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.13 NAME 'radiusFramedCompression' DESC 'replyItem: Framed-Compression' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.14 NAME 'radiusFramedIPAddress' DESC 'replyItem: Framed-IP-Address' EQUALITY caseIgnoreMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.15 NAME 'radiusFramedIPNetmask' DESC 'replyItem: Framed-IP-Netmask' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.16 NAME 'radiusFramedIPXNetwork' DESC 'replyItem: Framed-IPX-Network' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.17 NAME 'radiusFramedMTU' DESC 'replyItem: Framed-MTU' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.18 NAME 'radiusFramedProtocol' DESC 'replyItem: Framed-Protocol' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.19 NAME 'radiusFramedRoute' DESC 'replyItem: Framed-Route' EQUALITY caseIgnoreMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.20 NAME 'radiusFramedRouting' DESC 'replyItem: Framed-Routing' EQUALITY caseIgnoreMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.46 NAME 'radiusGroupName' EQUALITY caseIgnoreMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.47 NAME 'radiusHint' EQUALITY caseIgnoreMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.48 NAME 'radiusHuntgroupName' EQUALITY caseIgnoreMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.21 NAME 'radiusIdleTimeout' DESC 'replyItem: Idle-Timeout' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.22 NAME 'radiusLoginIPHost' DESC 'replyItem: Login-IP-Host' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.23 NAME 'radiusLoginLATGroup' DESC 'replyItem: Login-LAT-Group' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.24 NAME 'radiusLoginLATNode' DESC 'replyItem: Login-LAT-Node' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.25 NAME 'radiusLoginLATPort' DESC 'replyItem: Login-LAT-Port' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.26 NAME 'radiusLoginLATService' DESC 'replyItem: Login-LAT-Service' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.27 NAME 'radiusLoginService' DESC 'replyItem: Login-Service' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.28 NAME 'radiusLoginTCPPort' DESC 'replyItem: Login-TCP-Port' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.29 NAME 'radiusPasswordRetry' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.30 NAME 'radiusPortLimit' DESC 'replyItem: Port-Limit' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.31 NAME 'radiusPrompt' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.49 NAME 'radiusProfileDN' EQUALITY distinguishedNameMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.12 )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.50 NAME 'radiusProfileSuspendedDN' EQUALITY distinguishedNameMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.12 )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.51 NAME 'radiusProxyToRealm' EQUALITY caseIgnoreMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.52 NAME 'radiusRealm' EQUALITY caseIgnoreMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.32 NAME 'radiusServiceType' DESC 'replyItem: Service-Type' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.33 NAME 'radiusSessionTimeout' DESC 'replyItem: Session-Timeout' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.34 NAME 'radiusTerminationAction' DESC 'replyItem: Termination-Action' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.35 NAME 'radiusTunnelAssignmentId' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.36 NAME 'radiusTunnelMediumType' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.37 NAME 'radiusTunnelPassword' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.38 NAME 'radiusTunnelPreference' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.39 NAME 'radiusTunnelPrivateGroupId' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.40 NAME 'radiusTunnelServerEndpoint' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.41 NAME 'radiusTunnelType' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.42 NAME 'radiusVSA' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.43 NAME 'radiusTunnelClientEndpoint' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.53 NAME 'radiusSimultaneousUse' DESC 'controlItem: Simultaneous-Use' SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.54 NAME 'radiusLoginTime' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.55 NAME 'radiusUserCategory' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.56 NAME 'radiusStripUserName' SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.57 NAME 'dialupAccess' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.58 NAME 'radiusExpiration' DESC 'controlItem: Expiration' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.59 NAME 'radiusAttribute' DESC 'controlItem: $GENERIC$' EQUALITY caseIgnoreMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.61 NAME 'radiusNASIpAddress' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.62 NAME 'radiusReplyMessage' DESC 'replyItem: Reply-Message' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.97 NAME 'radiusFramedIPv6Prefix' DESC 'replyItem: Framed-IPv6-Prefix' EQUALITY caseIgnoreMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.168 NAME 'radiusFramedIPv6Address' DESC 'replyItem: Framed-IPv6-Address' EQUALITY caseIgnoreMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.169 NAME 'radiusDNSServerIPv6Address' DESC 'replyItem: DNS-Server-IPv6-Address' EQUALITY caseIgnoreMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.170 NAME 'radiusRouteIPv6Information' DESC 'replyItem: Route-IPv6-Information' EQUALITY caseIgnoreMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.171 NAME 'radiusDelegatedIPv6PrefixPool' DESC 'replyItem: Delegated-IPv6-Prefix-Pool' EQUALITY caseIgnoreMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.172 NAME 'radiusStatefulIPv6AddressPool' DESC 'replyItem: Stateful-IPv6-Address-Pool' EQUALITY caseIgnoreMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.256 NAME 'radiusControlAttribute' DESC 'controlItem: $GENERIC$' EQUALITY caseIgnoreMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.257 NAME 'radiusReplyAttribute' DESC 'replyItem: $GENERIC$' EQUALITY caseIgnoreMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.258 NAME 'radiusRequestAttribute' DESC 'requestItem: $GENERIC$' EQUALITY caseIgnoreMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.259 NAME 'radiusProfilePriority' DESC 'Priority to apply profiles' SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 EQUALITY integerMatch ORDERING integerOrderingMatch SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.260 NAME 'radiusProfileCondition' DESC 'Condition to apply profiles' EQUALITY caseIgnoreMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.2.1.261 NAME 'radiusProfileFallthrough' DESC 'Condition to apply additional profiles after this one' EQUALITY caseIgnoreMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.1.1.1 NAME 'radiusClientSecret' DESC 'Client Secret' EQUALITY caseIgnoreMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
+olcAttributeTypes: ( 1.3.6.1.4.1.11344.4.2.1.1.2 NAME 'radiusClientRequireMa' DESC 'Require Message Authenticator' EQUALITY booleanMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 SINGLE-VALUE )
+olcObjectClasses: ( 1.3.6.1.4.1.11344.4.2.2.2.1 NAME 'radiusProfile' SUP top AUXILIARY MAY ( radiusArapFeatures $ radiusArapSecurity $ radiusArapZoneAccess $ radiusAuthType $ radiusCallbackId $ radiusCallbackNumber $ radiusCalledStationId $ radiusCallingStationId $ radiusClass $ radiusClientIPAddress $ radiusFilterId $ radiusFramedAppleTalkLink $ radiusFramedAppleTalkNetwork $ radiusFramedAppleTalkZone $ radiusFramedCompression $ radiusFramedIPAddress $ radiusFramedIPNetmask $ radiusFramedIPXNetwork $ radiusFramedMTU $ radiusFramedProtocol $ radiusAttribute $ radiusFramedRoute $ radiusFramedRouting $ radiusIdleTimeout $ radiusGroupName $ radiusHint $ radiusHuntgroupName $ radiusLoginIPHost $ radiusLoginLATGroup $ radiusLoginLATNode $ radiusLoginLATPort $ radiusLoginLATService $ radiusLoginService $ radiusLoginTCPPort $ radiusLoginTime $ radiusPasswordRetry $ radiusPortLimit $ radiusPrompt $ radiusProxyToRealm $ radiusRealm $ radiusServiceType $ radiusSessionTimeout $ radiusStripUserName $ radiusTerminationAction $ radiusTunnelClientEndpoint $ radiusProfileDN $ radiusProfileSuspendedDN $ radiusSimultaneousUse $ radiusTunnelAssignmentId $ radiusTunnelMediumType $ radiusTunnelPassword $ radiusTunnelPreference $ radiusTunnelPrivateGroupId $ radiusTunnelServerEndpoint $ radiusTunnelType $ radiusUserCategory $ radiusVSA $ radiusExpiration $ dialupAccess $ radiusNASIpAddress $ radiusReplyMessage $ radiusFramedIPv6Prefix $ radiusFramedIPv6Address $ radiusDNSServerIPv6Address $ radiusRouteIPv6Information $ radiusDelegatedIPv6PrefixPool $ radiusStatefulIPv6AddressPool $ radiusControlAttribute $ radiusReplyAttribute $ radiusRequestAttribute $ radiusProfilePriority $ radiusProfileCondition $ radiusProfileFallthrough ) )
+olcObjectClasses: ( 1.3.6.1.4.1.11344.4.2.1.2.1 NAME 'radiusClient' SUP top AUXILIARY MUST radiusClientSecret MAY radiusClientRequireMa )
@@ -0,0 +1,602 @@
+#
+# radiusProfile should be added to a freeradiusPolicy, user/subscriber objects, groups,
+# or any other object which has RADIUS attributes associated with it.
+#
+# 11344.4.2.2.[1|2]
+# |     | | |   |_ .1 Profile attributes, .2 profile objects
+# |     | | |_ Profile
+# |     | |_ RADIUS
+# |     |_ LDAP Attributes
+# |_ Vendor
+#
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.1
+	NAME 'radiusArapFeatures'
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.2
+	NAME 'radiusArapSecurity'
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.3
+	NAME 'radiusArapZoneAccess'
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.44
+	NAME 'radiusAuthType'
+	DESC 'controlItem: Auth-Type'
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.4
+	NAME 'radiusCallbackId'
+	DESC 'replyItem: Callback-Id'
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.5
+	NAME 'radiusCallbackNumber'
+	DESC 'replyItem: Callback-Number'
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.6
+	NAME 'radiusCalledStationId'
+	DESC 'controlItem: Called-Station-Id'
+	EQUALITY caseIgnoreMatch
+	SUBSTR caseIgnoreSubstringsMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.7
+	NAME 'radiusCallingStationId'
+	DESC 'controlItem: Calling-Station-Id'
+	EQUALITY caseIgnoreMatch
+	SUBSTR caseIgnoreSubstringsMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.8
+	NAME 'radiusClass'
+	DESC 'replyItem: Class'
+	EQUALITY caseIgnoreMatch
+	SUBSTR caseIgnoreSubstringsMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.45
+	NAME 'radiusClientIPAddress'
+	EQUALITY caseIgnoreMatch
+	SUBSTR caseIgnoreSubstringsMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.9
+	NAME 'radiusFilterId'
+	DESC 'replyItem: Filter-Id'
+	EQUALITY caseIgnoreMatch
+	SUBSTR caseIgnoreSubstringsMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.10
+	NAME 'radiusFramedAppleTalkLink'
+	DESC 'replyItem: Framed-AppleTalk-Link'
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.11
+	NAME 'radiusFramedAppleTalkNetwork'
+	DESC 'replyItem: Framed-AppleTalk-Network'
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.12
+	NAME 'radiusFramedAppleTalkZone'
+	DESC 'replyItem: Framed-AppleTalk-Zone'
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.13
+	NAME 'radiusFramedCompression'
+	DESC 'replyItem: Framed-Compression'
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.14
+	NAME 'radiusFramedIPAddress'
+	DESC 'replyItem: Framed-IP-Address'
+	EQUALITY caseIgnoreMatch
+	SUBSTR caseIgnoreSubstringsMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.15
+	NAME 'radiusFramedIPNetmask'
+	DESC 'replyItem: Framed-IP-Netmask'
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.16
+	NAME 'radiusFramedIPXNetwork'
+	DESC 'replyItem: Framed-IPX-Network'
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.17
+	NAME 'radiusFramedMTU'
+	DESC 'replyItem: Framed-MTU'
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.18
+	NAME 'radiusFramedProtocol'
+	DESC 'replyItem: Framed-Protocol'
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.19
+	NAME 'radiusFramedRoute'
+	DESC 'replyItem: Framed-Route'
+	EQUALITY caseIgnoreMatch
+	SUBSTR caseIgnoreSubstringsMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.20
+	NAME 'radiusFramedRouting'
+	DESC 'replyItem: Framed-Routing'
+	EQUALITY caseIgnoreMatch
+	SUBSTR caseIgnoreSubstringsMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.46
+	NAME 'radiusGroupName'
+	EQUALITY caseIgnoreMatch
+	SUBSTR caseIgnoreSubstringsMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.47
+	NAME 'radiusHint'
+	EQUALITY caseIgnoreMatch
+	SUBSTR caseIgnoreSubstringsMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.48
+	NAME 'radiusHuntgroupName'
+	EQUALITY caseIgnoreMatch
+	SUBSTR caseIgnoreSubstringsMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.21
+	NAME 'radiusIdleTimeout'
+	DESC 'replyItem: Idle-Timeout'
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.22
+	NAME 'radiusLoginIPHost'
+	DESC 'replyItem: Login-IP-Host'
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.23
+	NAME 'radiusLoginLATGroup'
+	DESC 'replyItem: Login-LAT-Group'
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.24
+	NAME 'radiusLoginLATNode'
+	DESC 'replyItem: Login-LAT-Node'
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.25
+	NAME 'radiusLoginLATPort'
+	DESC 'replyItem: Login-LAT-Port'
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.26
+	NAME 'radiusLoginLATService'
+	DESC 'replyItem: Login-LAT-Service'
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.27
+	NAME 'radiusLoginService'
+	DESC 'replyItem: Login-Service'
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.28
+	NAME 'radiusLoginTCPPort'
+	DESC 'replyItem: Login-TCP-Port'
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.29
+	NAME 'radiusPasswordRetry'
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.30
+	NAME 'radiusPortLimit'
+	DESC 'replyItem: Port-Limit'
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.31
+	NAME 'radiusPrompt'
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.49
+	NAME 'radiusProfileDN'
+	EQUALITY distinguishedNameMatch
+	SUBSTR caseIgnoreSubstringsMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.12
+ )
+
+ attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.50
+	NAME 'radiusProfileSuspendedDN'
+	EQUALITY distinguishedNameMatch
+	SUBSTR caseIgnoreSubstringsMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.12
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.51
+	NAME 'radiusProxyToRealm'
+	EQUALITY caseIgnoreMatch
+	SUBSTR caseIgnoreSubstringsMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.52
+	NAME 'radiusRealm'
+	EQUALITY caseIgnoreMatch
+	SUBSTR caseIgnoreSubstringsMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.32
+	NAME 'radiusServiceType'
+	DESC 'replyItem: Service-Type'
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.33
+	NAME 'radiusSessionTimeout'
+	DESC 'replyItem: Session-Timeout'
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.34
+	NAME 'radiusTerminationAction'
+	DESC 'replyItem: Termination-Action'
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.35
+	NAME 'radiusTunnelAssignmentId'
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.36
+	NAME 'radiusTunnelMediumType'
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.37
+	NAME 'radiusTunnelPassword'
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.38
+	NAME 'radiusTunnelPreference'
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.39
+	NAME 'radiusTunnelPrivateGroupId'
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.40
+	NAME 'radiusTunnelServerEndpoint'
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.41
+	NAME 'radiusTunnelType'
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.42
+	NAME 'radiusVSA'
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.43
+	NAME 'radiusTunnelClientEndpoint'
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.53
+	NAME 'radiusSimultaneousUse'
+	DESC 'controlItem: Simultaneous-Use'
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.27
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.54
+	NAME 'radiusLoginTime'
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.55
+	NAME 'radiusUserCategory'
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.56
+	NAME 'radiusStripUserName'
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.7
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.57
+	NAME 'dialupAccess'
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.58
+	NAME 'radiusExpiration'
+	DESC 'controlItem: Expiration'
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.59
+	NAME 'radiusAttribute'
+	DESC 'controlItem: $GENERIC$'
+	EQUALITY caseIgnoreMatch
+	SUBSTR caseIgnoreSubstringsMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.61
+	NAME 'radiusNASIpAddress'
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.62
+	NAME 'radiusReplyMessage'
+	DESC 'replyItem: Reply-Message'
+	EQUALITY caseIgnoreMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+ )
+
+ attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.97
+        NAME 'radiusFramedIPv6Prefix'
+        DESC 'replyItem: Framed-IPv6-Prefix'
+        EQUALITY caseIgnoreMatch
+        SUBSTR caseIgnoreSubstringsMatch
+        SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+ )
+
+ attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.168
+        NAME 'radiusFramedIPv6Address'
+        DESC 'replyItem: Framed-IPv6-Address'
+        EQUALITY caseIgnoreMatch
+        SUBSTR caseIgnoreSubstringsMatch
+        SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+ )
+
+ attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.169
+        NAME 'radiusDNSServerIPv6Address'
+        DESC 'replyItem: DNS-Server-IPv6-Address'
+        EQUALITY caseIgnoreMatch
+        SUBSTR caseIgnoreSubstringsMatch
+        SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+ )
+
+ attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.170
+        NAME 'radiusRouteIPv6Information'
+        DESC 'replyItem: Route-IPv6-Information'
+        EQUALITY caseIgnoreMatch
+        SUBSTR caseIgnoreSubstringsMatch
+        SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+ )
+
+ attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.171
+        NAME 'radiusDelegatedIPv6PrefixPool'
+        DESC 'replyItem: Delegated-IPv6-Prefix-Pool'
+        EQUALITY caseIgnoreMatch
+        SUBSTR caseIgnoreSubstringsMatch
+        SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+ )
+
+ attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.172
+        NAME 'radiusStatefulIPv6AddressPool'
+        DESC 'replyItem: Stateful-IPv6-Address-Pool'
+        EQUALITY caseIgnoreMatch
+        SUBSTR caseIgnoreSubstringsMatch
+        SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.256
+	NAME 'radiusControlAttribute'
+	DESC 'controlItem: $GENERIC$'
+	EQUALITY caseIgnoreMatch
+	SUBSTR caseIgnoreSubstringsMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.257
+	NAME 'radiusReplyAttribute'
+	DESC 'replyItem: $GENERIC$'
+	EQUALITY caseIgnoreMatch
+	SUBSTR caseIgnoreSubstringsMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.258
+	NAME 'radiusRequestAttribute'
+	DESC 'requestItem: $GENERIC$'
+	EQUALITY caseIgnoreMatch
+	SUBSTR caseIgnoreSubstringsMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.259
+	NAME 'radiusProfilePriority'
+	DESC 'Priority to apply profiles'
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.27
+	EQUALITY integerMatch
+	ORDERING integerOrderingMatch
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.260
+	NAME 'radiusProfileCondition'
+	DESC 'Condition to apply profiles'
+	EQUALITY caseIgnoreMatch
+	SUBSTR caseIgnoreSubstringsMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.2.1.261
+	NAME 'radiusProfileFallthrough'
+	DESC 'Condition to apply additional profiles after this one'
+	EQUALITY caseIgnoreMatch
+	SUBSTR caseIgnoreSubstringsMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+ )
+
+objectclass ( 1.3.6.1.4.1.11344.4.2.2.2.1
+	NAME 'radiusProfile'
+	SUP top
+	AUXILIARY
+	MAY ( radiusArapFeatures $ radiusArapSecurity $ radiusArapZoneAccess $ radiusAuthType $ radiusCallbackId $ radiusCallbackNumber $ radiusCalledStationId $ radiusCallingStationId $ radiusClass $ radiusClientIPAddress $ radiusFilterId $ radiusFramedAppleTalkLink $ radiusFramedAppleTalkNetwork $ radiusFramedAppleTalkZone $ radiusFramedCompression $ radiusFramedIPAddress $ radiusFramedIPNetmask $ radiusFramedIPXNetwork $ radiusFramedMTU $ radiusFramedProtocol $ radiusAttribute $ radiusFramedRoute $ radiusFramedRouting $ radiusIdleTimeout $ radiusGroupName $ radiusHint $ radiusHuntgroupName $ radiusLoginIPHost $ radiusLoginLATGroup $ radiusLoginLATNode $ radiusLoginLATPort $ radiusLoginLATService $ radiusLoginService $ radiusLoginTCPPort $ radiusLoginTime $ radiusPasswordRetry $ radiusPortLimit $ radiusPrompt $ radiusProxyToRealm $ radiusRealm $ radiusServiceType $ radiusSessionTimeout $ radiusStripUserName $ radiusTerminationAction $ radiusTunnelClientEndpoint $ radiusProfileDN $ radiusProfileSuspendedDN $ radiusSimultaneousUse $ radiusTunnelAssignmentId $ radiusTunnelMediumType $ radiusTunnelPassword $ radiusTunnelPreference $ radiusTunnelPrivateGroupId $ radiusTunnelServerEndpoint $ radiusTunnelType $ radiusUserCategory $ radiusVSA $ radiusExpiration $ dialupAccess $ radiusNASIpAddress $ radiusReplyMessage $ radiusFramedIPv6Prefix $ radiusFramedIPv6Address $ radiusDNSServerIPv6Address $ radiusRouteIPv6Information $ radiusDelegatedIPv6PrefixPool $ radiusStatefulIPv6AddressPool $ radiusControlAttribute $ radiusReplyAttribute $ radiusRequestAttribute $ radiusProfilePriority $ radiusProfileCondition $ radiusProfileFallthrough )
+ )
+
+#
+# 11344.4.2.1.[1|2]
+# |     | | |   |_ .1 Profile attributes, .2 profile objects
+# |     | | |_ Client
+# |     | |_ RADIUS
+# |     |_ LDAP Attributes
+# |_ Vendor
+#
+attributetype ( 1.3.6.1.4.1.11344.4.2.1.1.1
+	NAME 'radiusClientSecret'
+	DESC 'Client Secret'
+	EQUALITY caseIgnoreMatch
+	SUBSTR caseIgnoreSubstringsMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
+	SINGLE-VALUE
+ )
+
+attributetype ( 1.3.6.1.4.1.11344.4.2.1.1.2
+	NAME 'radiusClientRequireMa'
+	DESC 'Require Message Authenticator'
+	EQUALITY booleanMatch
+	SYNTAX 1.3.6.1.4.1.1466.115.121.1.7
+	SINGLE-VALUE
+ )
+
+objectclass ( 1.3.6.1.4.1.11344.4.2.1.2.1
+	NAME 'radiusClient'
+	SUP top
+	AUXILIARY
+	MUST ( radiusClientSecret )
+	MAY ( radiusClientRequireMa )
+ )
@@ -0,0 +1,17 @@
+FROM nginx:alpine
+
+ENV HTTPS_UPSTREAM="proxy"
+ENV SSTP_UPSTREAM="sstp"
+ENV SNI_NAME="cloud.bearns.me"
+# self signed for client certification
+# put in /etc/nginx/certs/
+ENV CA_CERT="chain.pem"
+# put in /etc/nginx/certs/$SNI_NAME
+ENV CERT="fullchain.pem"
+ENV KEY="key.pem"
+
+RUN rm -f /etc/nginx/conf.d/default.conf
+
+COPY nginx.conf /etc/nginx/
+COPY *.conf.template /etc/nginx/templates/
+
@@ -0,0 +1,37 @@
+http {
+
+    log_format  main  '$remote_addr - $remote_user [$time_local] "$request" '
+                      '$status $body_bytes_sent "$http_referer" '
+                      '"$http_user_agent" "$http_x_forwarded_for"';
+
+    server {
+        listen unix:/tmp/fallback-stream.socket ssl proxy_protocol;
+        server_name _;
+
+        ssl_certificate /etc/nginx/certs/${SNI_NAME}/${CERT};
+        ssl_certificate_key /etc/nginx/certs/${SNI_NAME}/${KEY};
+
+        access_log  /dev/stdout  main;
+
+        location / {
+            root   /usr/share/nginx/html;
+            index  index.html index.htm;
+        }
+
+        #error_page  404              /404.html;
+
+        # redirect server error pages to the static page /50x.html
+        #
+        error_page   500 502 503 504  /50x.html;
+        location = /50x.html {
+            root   /usr/share/nginx/html;
+        }
+
+        # deny access to .htaccess files, if Apache's document root
+        # concurs with nginx's one
+        #
+        #location ~ /\.ht {
+        #    deny  all;
+        #}
+    }
+}
@@ -0,0 +1,12 @@
+user  nginx;
+worker_processes  auto;
+
+error_log  /var/log/nginx/error.log notice;
+pid        /var/run/nginx.pid;
+
+
+events {
+    worker_connections  1024;
+}
+
+include /etc/nginx/conf.d/*.conf;
@@ -0,0 +1,61 @@
+error_log /dev/stderr;
+
+stream {
+    log_format stream '"$ssl_preread_server_name" $remote_addr [$time_local] '
+                      '$protocol $status $bytes_sent $bytes_received "$upstream_addr" '
+                      '"$upstream_bytes_sent" "$upstream_bytes_received" "$upstream_connect_time"';
+
+    map $ssl_preread_server_name $sni_name {
+            ${SNI_NAME} cert-check;
+            default https;
+        }
+
+    upstream https {
+        server ${HTTPS_UPSTREAM}:443;
+    }
+
+    upstream cert-check {
+        server unix:/tmp/virtual-stream.socket;
+    }
+
+    server {
+        listen 443;
+        listen [::]:443;
+
+        access_log /dev/stdout stream;
+
+        proxy_pass $sni_name;
+        ssl_preread on;
+        # todo nginx-proxy by default don't listen proxy_protocol, enable it in both sides
+        #proxy_protocol on;
+    }
+
+    map $ssl_client_verify $name {
+        SUCCESS sstp;
+        default fallback;
+    }
+
+    upstream sstp {
+        server ${SSTP_UPSTREAM}:443;
+    }
+
+    upstream fallback {
+        server unix:/tmp/fallback-stream.socket;
+    }
+
+    server {
+        listen unix:/tmp/virtual-stream.socket ssl;
+
+        ssl_certificate /etc/nginx/certs/${SNI_NAME}/${CERT};
+        ssl_certificate_key /etc/nginx/certs/${SNI_NAME}/${KEY};
+
+        ssl_trusted_certificate /etc/nginx/certs/${CA_CERT};
+        ssl_verify_client optional;
+
+        # Doesn't work without it
+        proxy_ssl on;
+
+        proxy_pass $name;
+        proxy_protocol on;
+    }
+}
@@ -0,0 +1 @@
+./keys/privkey.pem
@@ -0,0 +1,7 @@
+server {
+    listen 443 ssl;
+    server_name _;
+    ssl_certificate /etc/nginx/certs/cert.pem;
+    ssl_certificate_key /etc/nginx/certs/privkey.pem;
+    return       404;
+}
@@ -0,0 +1,3 @@
+FROM nginx:alpine
+
+COPY 00-default.conf /etc/nginx/conf.d/
@@ -0,0 +1,38 @@
+ARG from=debian:bookworm
+FROM ${from}
+ARG DEBIAN_FRONTEND=noninteractive
+
+#
+#  We need also curl to get the signing key
+#
+RUN apt-get update \
+ && apt-get install -y curl
+
+#
+#  Set up NetworkRADIUS extras repository
+#
+RUN install -d -o root -g root -m 0755 /etc/apt/keyrings \
+ && curl -o /etc/apt/keyrings/packages.networkradius.com.asc "https://packages.inkbridgenetworks.com/pgp/packages%40networkradius.com" \
+ && echo "deb [signed-by=/etc/apt/keyrings/packages.networkradius.com.asc] http://packages.networkradius.com/extras/debian/bookworm bookworm main" > /etc/apt/sources.list.d/networkradius-extras.list
+
+#
+#  Install from reposittory
+#
+RUN apt-get install -y freeradius freeradius-ldap \
+ && apt-get clean \
+ && rm -r /var/lib/apt/lists/* \
+ && ln -s /etc/freeradius /etc/raddb
+
+COPY --chown=freerad:freerad ./raddb* /etc/raddb/3.0/
+
+#Disable EAP
+RUN rm -f /etc/raddb/3.0/mods-enabled/eap & \
+    rm -f /etc/raddb/3.0/sites-enabled/inner-tunnel
+
+WORKDIR /
+
+USER freerad:freerad
+
+EXPOSE 1812/udp 1813/udp
+ENTRYPOINT ["freeradius"]
+CMD ["-X"]
@@ -0,0 +1,296 @@
+# -*- text -*-
+##
+## clients.conf -- client configuration directives
+##
+##	$Id: 60f9f4bf8a32804182e4516ac69ac510d25215d1 $
+
+#######################################################################
+#
+#  Define RADIUS clients (usually a NAS, Access Point, etc.).
+
+#
+#  Defines a RADIUS client.
+#
+#  '127.0.0.1' is another name for 'localhost'.  It is enabled by default,
+#  to allow testing of the server after an initial installation.  If you
+#  are not going to be permitting RADIUS queries from localhost, we suggest
+#  that you delete, or comment out, this entry.
+#
+#
+
+#
+#  Each client has a "short name" that is used to distinguish it from
+#  other clients.
+#
+#  In version 1.x, the string after the word "client" was the IP
+#  address of the client.  In 2.0, the IP address is configured via
+#  the "ipaddr" or "ipv6addr" fields.  For compatibility, the 1.x
+#  format is still accepted.
+#
+client localhost {
+	#  Only *one* of ipaddr, ipv4addr, ipv6addr may be specified for
+	#  a client.
+	#
+	#  ipaddr will accept IPv4 or IPv6 addresses with optional CIDR
+	#  notation '/<mask>' to specify ranges.
+	#
+	#  ipaddr will accept domain names e.g. example.org resolving
+	#  them via DNS.
+	#
+	#  If both A and AAAA records are found, A records will be
+	#  used in preference to AAAA.
+	ipaddr = 127.0.0.1
+
+	#  Same as ipaddr but allows v4 addresses only. Requires A
+	#  record for domain names.
+#	ipv4addr = *	# any.  127.0.0.1 == localhost
+
+	#  Same as ipaddr but allows v6 addresses only. Requires AAAA
+	#  record for domain names.
+#	ipv6addr = ::	# any.  ::1 == localhost
+
+	#
+	#  A note on DNS:  We STRONGLY recommend using IP addresses
+	#  rather than host names.  Using host names means that the
+	#  server will do DNS lookups when it starts, making it
+	#  dependent on DNS.  i.e. If anything goes wrong with DNS,
+	#  the server won't start!
+	#
+	#  The server also looks up the IP address from DNS once, and
+	#  only once, when it starts.  If the DNS record is later
+	#  updated, the server WILL NOT see that update.
+	#
+
+	#
+	#  The transport protocol.
+	#
+	#  If unspecified, defaults to "udp", which is the traditional
+	#  RADIUS transport.  It may also be "tcp", in which case the
+	#  server will accept connections from this client ONLY over TCP.
+	#
+	proto = *
+
+	#
+	#  The shared secret use to "encrypt" and "sign" packets between
+	#  the NAS and FreeRADIUS.  You MUST change this secret from the
+	#  default, otherwise it's not a secret any more!
+	#
+	#  The secret can be any string, up to 8k characters in length.
+	#
+	#  Control codes can be entered vi octal encoding,
+	#	e.g. "\101\102" == "AB"
+	#  Quotation marks can be entered by escaping them,
+	#	e.g. "foo\"bar"
+	#
+	#  A note on security:  The security of the RADIUS protocol
+	#  depends COMPLETELY on this secret!  We recommend using a
+	#  shared secret that is composed of:
+	#
+	#	upper case letters
+	#	lower case letters
+	#	numbers
+	#
+	#  And is at LEAST 8 characters long, preferably 16 characters in
+	#  length.  The secret MUST be random, and should not be words,
+	#  phrase, or anything else that is recognisable.
+	#
+	#  The default secret below is only for testing, and should
+	#  not be used in any real environment.
+	#
+	secret = testing123
+
+	#
+	#  Old-style clients do not send a Message-Authenticator
+	#  in an Access-Request.  RFC 5080 suggests that all clients
+	#  SHOULD include it in an Access-Request.  The configuration
+	#  item below allows the server to require it.  If a client
+	#  is required to include a Message-Authenticator and it does
+	#  not, then the packet will be silently discarded.
+	#
+	#  allowed values: yes, no
+	require_message_authenticator = no
+
+	#
+	#  The short name is used as an alias for the fully qualified
+	#  domain name, or the IP address.
+	#
+	#  It is accepted for compatibility with 1.x, but it is no
+	#  longer necessary in >= 2.0
+	#
+#	shortname = localhost
+
+	#
+	# the following three fields are optional, but may be used by
+	# checkrad.pl for simultaneous use checks
+	#
+
+	#
+	# The nas_type tells 'checkrad.pl' which NAS-specific method to
+	#  use to query the NAS for simultaneous use.
+	#
+	#  Permitted NAS types are:
+	#
+	#	cisco
+	#	computone
+	#	livingston
+	#	juniper
+	#	max40xx
+	#	multitech
+	#	netserver
+	#	pathras
+	#	patton
+	#	portslave
+	#	tc
+	#	usrhiper
+	#	other		# for all other types
+
+	#
+	nas_type	 = other	# localhost isn't usually a NAS...
+
+	#
+	#  The following two configurations are for future use.
+	#  The 'naspasswd' file is currently used to store the NAS
+	#  login name and password, which is used by checkrad.pl
+	#  when querying the NAS for simultaneous use.
+	#
+#	login	   = !root
+#	password	= someadminpas
+
+	#
+	#  As of 2.0, clients can also be tied to a virtual server.
+	#  This is done by setting the "virtual_server" configuration
+	#  item, as in the example below.
+	#
+#	virtual_server = home1
+
+	#
+	#  A pointer to the "home_server_pool" OR a "home_server"
+	#  section that contains the CoA configuration for this
+	#  client.  For an example of a coa home server or pool,
+	#  see raddb/sites-available/originate-coa
+#	coa_server = coa
+
+	#
+	#  Response window for proxied packets.  If non-zero,
+	#  then the lower of (home, client) response_window
+	#  will be used.
+	#
+	#  i.e. it can be used to lower the response_window
+	#  packets from one client to a home server.  It cannot
+	#  be used to raise the response_window.
+	#
+#	response_window = 10.0
+
+	#
+	#  Connection limiting for clients using "proto = tcp".
+	#
+	#  This section is ignored for clients sending UDP traffic
+	#
+	limit {
+		#
+		#  Limit the number of simultaneous TCP connections from a client
+		#
+		#  The default is 16.
+		#  Setting this to 0 means "no limit"
+		max_connections = 16
+
+		#  The per-socket "max_requests" option does not exist.
+
+		#
+		#  The lifetime, in seconds, of a TCP connection.  After
+		#  this lifetime, the connection will be closed.
+		#
+		#  Setting this to 0 means "forever".
+		lifetime = 0
+
+		#
+		#  The idle timeout, in seconds, of a TCP connection.
+		#  If no packets have been received over the connection for
+		#  this time, the connection will be closed.
+		#
+		#  Setting this to 0 means "no timeout".
+		#
+		#  We STRONGLY RECOMMEND that you set an idle timeout.
+		#
+		idle_timeout = 30
+	}
+}
+
+# IPv6 Client
+client localhost_ipv6 {
+	ipv6addr	= ::1
+	secret		= testing123
+}
+
+# All IPv6 Site-local clients
+#client sitelocal_ipv6 {
+#	ipv6addr	= fe80::/16
+#	secret		= testing123
+#}
+
+#client example.org {
+#	ipaddr		= radius.example.org
+#	secret		= testing123
+#}
+
+#
+#  You can now specify one secret for a network of clients.
+#  When a client request comes in, the BEST match is chosen.
+#  i.e. The entry from the smallest possible network.
+#
+#client private-network-1 {
+#	ipaddr		= 192.0.2.0/24
+#	secret		= testing123-1
+#}
+
+#client private-network-2 {
+#	ipaddr		= 198.51.100.0/24
+#	secret		= testing123-2
+#}
+
+#######################################################################
+#
+#  Per-socket client lists.  The configuration entries are exactly
+#  the same as above, but they are nested inside of a section.
+#
+#  You can have as many per-socket client lists as you have "listen"
+#  sections, or you can re-use a list among multiple "listen" sections.
+#
+#  Un-comment this section, and edit a "listen" section to add:
+#  "clients = per_socket_clients".  That IP address/port combination
+#  will then accept ONLY the clients listed in this section.
+#
+#  There are additional considerations when using clients from SQL.
+#
+#  A client can be link to a virtual server via modules such as SQL.
+#  This link is done via the following process:
+#
+#  If there is no listener in a virtual server, SQL clients are added
+#  to the global list for that virtual server.
+#
+#  If there is a listener, and the first listener does not have a
+#  "clients=..." configuration item, SQL clients are added to the
+#  global list.
+#
+#  If there is a listener, and the first one does have a "clients=..."
+#  configuration item, SQL clients are added to that list.  The client
+#  { ...} ` configured in that list are also added for that listener.
+#
+#  The only issue is if you have multiple listeners in a virtual
+#  server, each with a different client list, then the SQL clients are
+#  added only to the first listener.
+#
+#clients per_socket_clients {
+#	client socket_client {
+#		ipaddr = 192.0.2.4
+#		secret = testing123
+#	}
+#}
+client sstp {
+#	ipaddr = *
+#	ipv4addr = *
+	ipv6addr = fc00:b10c:4::ffff
+	proto = udp
+	secret = secret123
+	require_message_authenticator = no
+}
@@ -0,0 +1,702 @@
+# -*- text -*-
+#
+#  $Id: bc879ccc20354d5d32afa1f8b4d10422d5184eab $
+
+#
+#  Lightweight Directory Access Protocol (LDAP)
+#
+ldap {
+	#  Note that this needs to match the name(s) in the LDAP server
+	#  certificate, if you're using ldaps.  See OpenLDAP documentation
+	#  for the behavioral semantics of specifying more than one host.
+	#
+	#  Depending on the libldap in use, server may be an LDAP URI.
+	#  In the case of OpenLDAP this allows additional the following
+	#  additional schemes:
+	#  - ldaps:// (LDAP over SSL)
+	#  - ldapi:// (LDAP over Unix socket)
+	#  - ldapc:// (Connectionless LDAP)
+	server = 'ldap'
+#	server = 'ldap.rrdns.example.org'
+#	server = 'ldap.rrdns.example.org'
+
+	#  Port to connect on, defaults to 389, will be ignored for LDAP URIs.
+#	port = 389
+
+	#  Administrator account for searching and possibly modifying.
+	#  If using SASL + KRB5 these should be commented out.
+	identity = 'cn=readonly,dc=bearns,dc=me'
+	password = readonly
+
+	#  Unless overridden in another section, the dn from which all
+	#  searches will start from.
+	base_dn = 'dc=bearns,dc=me'
+
+	#
+	#  You can run the 'ldapsearch' command line tool using the
+	#  parameters from this module's configuration.
+	#
+	#    ldapsearch -D ${identity} -w ${password} -h ${server}  -b 'CN=user,${base_dn}'
+	#
+	#  That will give you the LDAP information for 'user'.
+	#
+	#  Group membership can be queried by using the above "ldapsearch" string,
+	#  and adding "memberof" qualifiers.  For ActiveDirectory, use:
+	#
+	#    ldapsearch ... '(&(objectClass=user)(sAMAccountName=user)(memberof=CN=group,${base_dn}))'
+	#
+	#  Where 'user' is the user as above, and 'group' is the group you are querying for.
+	#
+
+	#
+	#  SASL parameters to use for admin binds
+	#
+	#  When we're prompted by the SASL library, these control
+	#  the responses given, as well as the identity and password
+	#  directives above.
+	#
+	#  If any directive is commented out, a NULL response will be
+	#  provided to cyrus-sasl.
+	#
+	#  Unfortunately the only way to control Keberos here is through
+	#  environmental variables, as cyrus-sasl provides no API to
+	#  set the krb5 config directly.
+	#
+	#  Full documentation for MIT krb5 can be found here:
+	#
+	#	http://web.mit.edu/kerberos/krb5-devel/doc/admin/env_variables.html
+	#
+	#  At a minimum you probably want to set KRB5_CLIENT_KTNAME.
+	#
+	sasl {
+		# SASL mechanism
+#		mech = 'PLAIN'
+
+		# SASL authorisation identity to proxy.
+#		proxy = 'autz_id'
+
+		# SASL realm. Used for kerberos.
+#		realm = 'example.org'
+	}
+
+	#
+	#  Generic valuepair attribute
+	#
+
+	#  If set, this will attribute will be retrieved in addition to any
+	#  mapped attributes.
+	#
+	#  Values should be in the format:
+	#  	<radius attr> <op> <value>
+	#
+	#  Where:
+	#  	<radius attr>:	Is the attribute you wish to create
+	# 			with any valid list and request qualifiers.
+	#  	<op>: 		Is any assignment operator (=, :=, +=, -=).
+	#  	<value>:	Is the value to parse into the new valuepair.
+	# 			If the value is wrapped in double quotes it
+	#			will be xlat expanded.
+#	valuepair_attribute = 'radiusAttribute'
+
+	#
+	#  Mapping of LDAP directory attributes to RADIUS dictionary attributes.
+	#
+
+	#  WARNING: Although this format is almost identical to the unlang
+	#  update section format, it does *NOT* mean that you can use other
+	#  unlang constructs in module configuration files.
+	#
+	#  Configuration items are in the format:
+	# 	<radius attr> <op> <ldap attr>
+	#
+	#  Where:
+	#  	<radius attr>:	Is the destination RADIUS attribute
+	# 			with any valid list and request qualifiers.
+	#  	<op>: 		Is any assignment attribute (=, :=, +=, -=).
+	#  	<ldap attr>:	Is the attribute associated with user or
+	#			profile objects in the LDAP directory.
+	# 			If the attribute name is wrapped in double
+	# 			quotes it will be xlat expanded.
+	#
+	#  Request and list qualifiers may also be placed after the 'update'
+	#  section name to set defaults destination requests/lists
+	#  for unqualified RADIUS attributes.
+	#
+	#  Note: LDAP attribute names should be single quoted unless you want
+	#  the name value to be derived from an xlat expansion, or an
+	#  attribute ref.
+	update {
+		control:Password-With-Header	+= 'userPassword'
+#		control:NT-Password		:= 'ntPassword'
+#		reply:Reply-Message		:= 'radiusReplyMessage'
+#		reply:Tunnel-Type		:= 'radiusTunnelType'
+#		reply:Tunnel-Medium-Type	:= 'radiusTunnelMediumType'
+#		reply:Tunnel-Private-Group-ID	:= 'radiusTunnelPrivategroupId'
+
+		#  Where only a list is specified as the RADIUS attribute,
+		#  the value of the LDAP attribute is parsed as a valuepair
+		#  in the same format as the 'valuepair_attribute' (above).
+		control:			+= 'radiusControlAttribute'
+		request:			+= 'radiusRequestAttribute'
+		reply:				+= 'radiusReplyAttribute'
+
+        # Set connection attributes from ldap
+        #reply:Reply-Message             := 'radiusReplyMessage'
+        reply:Framed-IP-Address     := 'radiusFramedIPAddress'
+        reply:Framed-IP-Netmask     := 'radiusFramedIPNetmask'
+        reply:Framed-MTU                    := 'radiusFramedMTU'
+        NAS-Port-Id := 'radiusServiceType' #Network namespace
+        #reply:Accel-VRF-Name   := 'radiusVRF'
+	}
+
+	#  Set to yes if you have eDirectory and want to use the universal
+	#  password mechanism.
+#	edir = no
+
+	#  Set to yes if you want to bind as the user after retrieving the
+	#  Cleartext-Password. This will consume the login grace, and
+	#  verify user authorization.
+#	edir_autz = no
+
+	#  LDAP "bind as user" configuration to check PAP passwords.
+	#
+	#  Active Directory needs "bind as user", which can be done by
+	#  adding the following "if" statement to the authorize {} section
+	#  of the virtual server, after the "ldap" module.  For
+	#  example:
+	#
+	#    ...
+	#    ldap
+	#    if ((ok || updated) && User-Password && !control:Auth-Type) {
+	#        update {
+	#            control:Auth-Type := ldap
+	#        }
+	#    }
+	#    ...
+	#
+	#  You will also need to uncomment the "Auth-Type LDAP" block in the
+	#  "authenticate" section.
+	#
+	#  This configuration is required because AD will not return the users
+	#  "known good" password to FreeRADIUS.  Instead, FreeRADIUS has to run
+	#  "Auth-Type LDAP" in order to do an LDAP "bind as user", which will hand
+	#  the user name / password to AD for verification.
+	#
+
+	#
+	#  Name of the attribute that contains the user DN.
+	#  The default name is LDAP-UserDn.
+	#
+	#  If you have multiple LDAP instances, you should
+	#  change this configuration item to:
+	#
+	#	${.:instance}-LDAP-UserDn
+	#
+	#  That change allows the modules to set their own
+	#  User DN, and to not conflict with each other.
+	#
+	user_dn = "LDAP-UserDn"
+
+	#
+	#  User object identification.
+	#
+	user {
+		#  Where to start searching in the tree for users
+		base_dn = "${..base_dn}"
+
+		#  Filter for user objects, should be specific enough
+		#  to identify a single user object.
+		#
+		#  For Active Directory, you should use
+		#  "samaccountname=" instead of "uid="
+		#
+		filter = "(uid=%{%{Stripped-User-Name}:-%{User-Name}})"
+
+		#  For Active Directory nested group, you should comment out the previous 'filter = ...'
+		#  and use the below. Where 'group' is the group you are querying for.
+		#
+		#  NOTE: The string '1.2.840.113556.1.4.1941' specifies LDAP_MATCHING_RULE_IN_CHAIN.
+		#  This applies only to DN attributes. This is an extended match operator that walks
+		#  the chain of ancestry in objects all the way to the root until it finds a match.
+		#  This reveals group nesting. It is available only on domain controllers with
+		#  Windows Server 2003 SP2 or Windows Server 2008 (or above).
+		#
+		#  See: https://social.technet.microsoft.com/wiki/contents/articles/5392.active-directory-ldap-syntax-filters.aspx
+		#
+#		filter = "(&(objectClass=user)(sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}})(memberOf:1.2.840.113556.1.4.1941:=cn=group,${..base_dn}))"
+
+		#  SASL parameters to use for user binds
+		#
+		#  When we're prompted by the SASL library, these control
+		#  the responses given.
+		#
+		#  Any of the config items below may be an attribute ref
+		#  or and expansion, so different SASL mechs, proxy IDs
+		#  and realms may be used for different users.
+		sasl {
+			# SASL mechanism
+#			mech = 'PLAIN'
+
+			# SASL authorisation identity to proxy.
+#			proxy = &User-Name
+
+			# SASL realm. Used for kerberos.
+#			realm = 'example.org'
+		}
+
+		#  Search scope, may be 'base', 'one', sub' or 'children'
+#		scope = 'sub'
+
+		#  Server side result sorting
+		#
+		#  A list of space delimited attributes to order the result
+		#  set by, if the filter matches multiple objects.
+		#  Only the first result in the set will be processed.
+		#
+		#  If the attribute name is prefixed with a hyphen '-' the
+		#  sorting order will be reversed for that attribute.
+		#
+		#  If sort_by is set, and the server does not support sorting
+		#  the search will fail.
+#		sort_by = '-uid'
+
+		#  If this is undefined, anyone is authorised.
+		#  If it is defined, the contents of this attribute
+		#  determine whether or not the user is authorised
+#		access_attribute = 'dialupAccess'
+
+		#  Control whether the presence of 'access_attribute'
+		#  allows access, or denys access.
+		#
+		#  If 'yes', and the access_attribute is present, or
+		#  'no' and the access_attribute is absent then access
+		#  will be allowed.
+		#
+		#  If 'yes', and the access_attribute is absent, or
+		#  'no' and the access_attribute is present, then
+		#  access will not be allowed.
+		#
+		#  If the value of the access_attribute is 'false', it
+		#  will negate the result.
+		#
+		#  e.g.
+		#    access_positive = yes
+		#    access_attribute = userAccessAllowed
+		#
+		#  With an LDAP object containing:
+		#    userAccessAllowed: false
+		#
+		#  Will result in the user being locked out.
+#		access_positive = yes
+	}
+
+	#
+	#  User membership checking.
+	#
+	group {
+		#  Where to start searching in the tree for groups
+		base_dn = "${..base_dn}"
+
+		#  Filter for group objects, should match all available
+		#  group objects a user might be a member of.
+		#
+		#  If using Active Directory you are likely to need "group"
+		#  instead of "posixGroup".
+		filter = '(objectClass=posixGroup)'
+
+		# Search scope, may be 'base', 'one', sub' or 'children'
+#		scope = 'sub'
+
+		#  Attribute that uniquely identifies a group.
+		#  Is used when converting group DNs to group
+		#  names.
+#		name_attribute = cn
+
+		#  Filter to find all group objects a user is a member of.
+		#  That is, group objects with attributes that
+		#  identify members (the inverse of membership_attribute).
+		#
+		#  Note that this configuration references the "user_dn"
+		#  configuration defined above.
+		#
+#		membership_filter = "(|(member=%{control:${..user_dn}})(memberUid=%{%{Stripped-User-Name}:-%{User-Name}}))"
+
+		#  The attribute, in user objects, which contain the names
+		#  or DNs of groups a user is a member of.
+		#
+		#  Unless a conversion between group name and group DN is
+		#  needed, there's no requirement for the group objects
+		#  referenced to actually exist.
+		#
+		#  If the LDAP server does not support the "memberOf"
+		#  attribute (or equivalent), then you will need to use the
+		#  membership_filter option above instead. If you can't see
+		#  the memberOf attribute then it is also possible that the
+		#  LDAP bind user does not have the correct permissions to
+		#  view it.
+		membership_attribute = 'memberOf'
+
+		#  If cacheable_name or cacheable_dn are enabled,
+		#  all group information for the user will be
+		#  retrieved from the directory and written to LDAP-Group
+		#  attributes appropriate for the instance of rlm_ldap.
+		#
+		#  For group comparisons these attributes will be checked
+		#  instead of querying the LDAP directory directly.
+		#
+		#  This feature is intended to be used with rlm_cache.
+		#
+		#  If you wish to use this feature, you should enable
+		#  the type that matches the format of your check items
+		#  i.e. if your groups are specified as DNs then enable
+		#  cacheable_dn else enable cacheable_name.
+#		cacheable_name = 'no'
+#		cacheable_dn = 'no'
+
+		#  Override the normal cache attribute (<inst>-LDAP-Group or
+		#  LDAP-Group if using the default instance) and create a
+		#  custom attribute.  This can help if multiple module instances
+		#  are used in fail-over.
+#		cache_attribute = 'LDAP-Cached-Membership'
+
+		#  If the group being checked is specified as a name, but
+		#  the user's groups are referenced by DN, and one of those
+		#  group DNs is invalid, the whole group check is treated as
+		#  invalid, and a negative result will be returned.
+		#  When set to 'yes', this option ignores invalid DN
+		#  references.
+#		allow_dangling_group_ref = 'no'
+	}
+
+	#
+	#  User profiles. RADIUS profile objects contain sets of attributes
+	#  to insert into the request. These attributes are mapped using
+	#  the same mapping scheme applied to user objects (the update section above).
+	#
+	profile {
+		#  Filter for RADIUS profile objects
+#		filter = '(objectclass=radiusprofile)'
+
+		#  The default profile.  This may be a DN or an attribute
+		#  reference.
+		#  To get old v2.2.x style behaviour, or to use the
+		#  &User-Profile attribute to specify the default profile,
+		#  set this to &control:User-Profile.
+#		default = 'cn=radprofile,dc=example,dc=org'
+
+		#  The LDAP attribute containing profile DNs to apply
+		#  in addition to the default profile above.  These are
+		#  retrieved from the user object, at the same time as the
+		#  attributes from the update section, are are applied
+		#  if authorization is successful.
+#		attribute = 'radiusProfileDn'
+	}
+
+	#
+	#  Bulk load clients from the directory
+	#
+	client {
+		#   Where to start searching in the tree for clients
+		base_dn = "${..base_dn}"
+
+		#
+		#  Filter to match client objects
+		#
+		filter = '(objectClass=radiusClient)'
+
+		# Search scope, may be 'base', 'one', 'sub' or 'children'
+#		scope = 'sub'
+
+		#
+		#  Sets default values (not obtained from LDAP) for new client entries
+		#
+		template {
+#			login				= 'test'
+#			password			= 'test'
+#			proto	 			= tcp
+#			require_message_authenticator	= yes
+
+			# Uncomment to add a home_server with the same
+			# attributes as the client.
+#			coa_server {
+#				response_window = 2.0
+#			}
+		}
+
+		#
+		#  Client attribute mappings are in the format:
+		#      <client attribute> = <ldap attribute>
+		#
+		#  The following attributes are required:
+		#    * ipaddr | ipv4addr | ipv6addr - Client IP Address.
+		#    * secret - RADIUS shared secret.
+		#
+		#  All other attributes usually supported in a client
+		#  definition are also supported here.
+		#
+		#  Schemas are available in doc/schemas/ldap for openldap and eDirectory
+		#
+		attribute {
+			ipaddr				= 'radiusClientIdentifier'
+			secret				= 'radiusClientSecret'
+#			shortname			= 'radiusClientShortname'
+#			nas_type			= 'radiusClientType'
+#			virtual_server			= 'radiusClientVirtualServer'
+#			require_message_authenticator	= 'radiusClientRequireMa'
+		}
+	}
+
+	#  Load clients on startup
+#	read_clients = no
+
+	#
+	#  Modify user object on receiving Accounting-Request
+	#
+
+	#  Useful for recording things like the last time the user logged
+	#  in, or the Acct-Session-ID for CoA/DM.
+	#
+	#  LDAP modification items are in the format:
+	# 	<ldap attr> <op> <value>
+	#
+	#  Where:
+	#  	<ldap attr>:	The LDAP attribute to add modify or delete.
+	#  	<op>: 		One of the assignment operators:
+	#			(:=, +=, -=, ++).
+	#			Note: '=' is *not* supported.
+	#  	<value>:	The value to add modify or delete.
+	#
+	#  WARNING: If using the ':=' operator with a multi-valued LDAP
+	#  attribute, all instances of the attribute will be removed and
+	#  replaced with a single attribute.
+	accounting {
+		reference = "%{tolower:type.%{Acct-Status-Type}}"
+
+		type {
+			start {
+				update {
+					description := "Online at %S"
+				}
+			}
+
+			interim-update {
+				update {
+					description := "Last seen at %S"
+				}
+			}
+
+			stop {
+				update {
+					description := "Offline at %S"
+				}
+			}
+		}
+	}
+
+	#
+	#  Post-Auth can modify LDAP objects too
+	#
+	post-auth {
+		update {
+			description := "Authenticated at %S"
+		}
+	}
+
+	#
+	#  LDAP connection-specific options.
+	#
+	#  These options set timeouts, keep-alives, etc. for the connections.
+	#
+	options {
+		#  Control under which situations aliases are followed.
+		#  May be one of 'never', 'searching', 'finding' or 'always'
+		#  default: libldap's default which is usually 'never'.
+		#
+		#  LDAP_OPT_DEREF is set to this value.
+#		dereference = 'always'
+
+		#
+		#  The following two configuration items control whether the
+		#  server follows references returned by LDAP directory.
+		#  They are  mostly for Active Directory compatibility.
+		#  If you set these to 'no', then searches will likely return
+		#  'operations error', instead of a useful result.
+		#
+		#  'rebind' causes any connections being established to follow
+		#  referrals to be bound using the admin credentials defined
+		#  for this module.  If it is set to 'no' libldap will bind
+		#  to those connections anonymously.
+		#
+		chase_referrals = yes
+		rebind = yes
+
+		# SASL Security Properties (see SASL_SECPROPS in ldap.conf man page).
+		# Note - uncomment when using GSS-API sasl mechanism along with TLS
+		# encryption against Active-Directory LDAP servers (this disables
+		# sealing and signing at the GSS level as required by AD).
+		#sasl_secprops = 'noanonymous,noplain,maxssf=0'
+
+		#  Seconds to wait for LDAP query to finish. default: 20
+		res_timeout = 10
+
+		#  Seconds LDAP server has to process the query (server-side
+		#  time limit). default: 20
+		#
+		#  LDAP_OPT_TIMELIMIT is set to this value.
+		srv_timelimit = 3
+
+		#  Seconds to wait for response of the server. (network
+		#  failures) default: 10
+		#
+		#  LDAP_OPT_NETWORK_TIMEOUT is set to this value.
+		net_timeout = 1
+
+		#  LDAP_OPT_X_KEEPALIVE_IDLE
+		idle = 60
+
+		#  LDAP_OPT_X_KEEPALIVE_PROBES
+		probes = 3
+
+		#  LDAP_OPT_X_KEEPALIVE_INTERVAL
+		interval = 3
+
+		#  ldap_debug: debug flag for LDAP SDK
+		#  (see OpenLDAP documentation).  Set this to enable
+		#  huge amounts of LDAP debugging on the screen.
+		#  You should only use this if you are an LDAP expert.
+		#
+		#	default: 0x0000 (no debugging messages)
+		#	Example:(LDAP_DEBUG_FILTER+LDAP_DEBUG_CONNS)
+		ldap_debug = 0x0028
+	}
+
+	#
+	#  This subsection configures the tls related items
+	#  that control how FreeRADIUS connects to an LDAP
+	#  server.  It contains all of the 'tls_*' configuration
+	#  entries used in older versions of FreeRADIUS.  Those
+	#  configuration entries can still be used, but we recommend
+	#  using these.
+	#
+	#  Note that some distributions use NSS for libldap instead
+	#  of OpenSSL.
+	#
+	#  If you see something like this in the debug output:
+	#
+	#	TLSMC: MozNSS compatibility interception begins.
+	#
+	#  Then there is a problem.
+	#
+	#	THIS LDAP INSTALLATION WILL NOT WORK WITH FREERADIUS.
+	#
+	#  You MUST install fixed LDAP libraries which use OpenSSL.
+	#
+	#  For more details, see:
+	#
+	#	http://packages.networkradius.com
+	#
+	tls {
+		# Set this to 'yes' to use TLS encrypted connections
+		# to the LDAP database by using the StartTLS extended
+		# operation.
+		#
+		# The StartTLS operation is supposed to be
+		# used with normal ldap connections instead of
+		# using ldaps (port 636) connections
+#		start_tls = yes
+
+#		ca_file	= ${certdir}/cacert.pem
+
+#		ca_path	= ${certdir}
+#		certificate_file = /path/to/radius.crt
+#		private_key_file = /path/to/radius.key
+#		random_file = /dev/urandom
+
+ 		#  Certificate Verification requirements.  Can be:
+		#    'never' (do not even bother trying)
+ 		#    'allow' (try, but don't fail if the certificate
+		#		cannot be verified)
+		#    'demand' (fail if the certificate does not verify)
+		#    'hard'  (similar to 'demand' but fails if TLS
+		#             cannot negotiate)
+ 		#
+		#  The default is libldap's default, which varies based
+		#  on the contents of ldap.conf.
+
+#		require_cert	= 'demand'
+
+		#
+		#  Minimum TLS version to accept. We STRONGLY recommend
+		#  setting this to "1.2"
+		#
+#		tls_min_version = "1.2"
+	}
+
+	#  As of v3, the 'pool' section has replaced the
+	#  following v2 configuration items:
+	#
+	#  ldap_connections_number
+
+	#
+	#  The connection pool is used to pool outgoing connections.
+	#
+	#  When the server is not threaded, the connection pool
+	#  limits are ignored, and only one connection is used.
+	pool {
+		#  Connections to create during module instantiation.
+		#  If the server cannot create specified number of
+		#  connections during instantiation it will exit.
+		#  Set to 0 to allow the server to start without the
+		#  directory being available.
+		start = ${thread[pool].start_servers}
+
+		#  Minimum number of connections to keep open
+		min = ${thread[pool].min_spare_servers}
+
+		#  Maximum number of connections
+		#
+		#  If these connections are all in use and a new one
+		#  is requested, the request will NOT get a connection.
+		#
+		#  Setting 'max' to LESS than the number of threads means
+		#  that some threads may starve, and you will see errors
+		#  like 'No connections available and at max connection limit'
+		#
+		#  Setting 'max' to MORE than the number of threads means
+		#  that there are more connections than necessary.
+		max = ${thread[pool].max_servers}
+
+		#  Spare connections to be left idle
+		#
+		#  NOTE: Idle connections WILL be closed if "idle_timeout"
+		#  is set.  This should be less than or equal to "max" above.
+		spare = ${thread[pool].max_spare_servers}
+
+		#  Number of uses before the connection is closed
+		#
+		#  0 means "infinite"
+		uses = 0
+
+		#  The number of seconds to wait after the server tries
+		#  to open a connection, and fails.  During this time,
+		#  no new connections will be opened.
+		retry_delay = 30
+
+		#  The lifetime (in seconds) of the connection
+		lifetime = 0
+
+		#  Idle timeout (in seconds).  A connection which is
+		#  unused for this length of time will be closed.
+		idle_timeout = 60
+
+		#  NOTE: All configuration settings are enforced.  If a
+		#  connection is closed because of 'idle_timeout',
+		#  'uses', or 'lifetime', then the total number of
+		#  connections MAY fall below 'min'.  When that
+		#  happens, it will open a new connection.  It will
+		#  also log a WARNING message.
+		#
+		#  The solution is to either lower the 'min' connections,
+		#  or increase lifetime/idle_timeout.
+	}
+}
@@ -0,0 +1,209 @@
+#
+# 	Configuration file for the rlm_files module.
+# 	Please see rlm_files(5) manpage for more information.
+#
+# 	This file contains authentication security and configuration
+#	information for each user.  Accounting requests are NOT processed
+#	through this file.  Instead, see 'accounting', in this directory.
+#
+#	The first field is the user's name and can be up to
+#	253 characters in length.  This is followed (on the same line) with
+#	the list of authentication requirements for that user.  This can
+#	include password, comm server name, comm server port number, protocol
+#	type (perhaps set by the "hints" file), and huntgroup name (set by
+#	the "huntgroups" file).
+#
+#	If you are not sure why a particular reply is being sent by the
+#	server, then run the server in debugging mode (radiusd -X), and
+#	you will see which entries in this file are matched.
+#
+#	When an authentication request is received from the comm server,
+#	these values are tested. Only the first match is used unless the
+#	"Fall-Through" variable is set to "Yes".
+#
+#	A special user named "DEFAULT" matches on all usernames.
+#	You can have several DEFAULT entries. All entries are processed
+#	in the order they appear in this file. The first entry that
+#	matches the login-request will stop processing unless you use
+#	the Fall-Through variable.
+#
+#	Indented (with the tab character) lines following the first
+#	line indicate the configuration values to be passed back to
+#	the comm server to allow the initiation of a user session.
+#	This can include things like the PPP configuration values
+#	or the host to log the user onto.
+#
+#	You can include another `users' file with `$INCLUDE users.other'
+
+#
+#	For a list of RADIUS attributes, and links to their definitions,
+#	see: http://www.freeradius.org/rfc/attributes.html
+#
+#	Entries below this point are examples included in the server for
+#	educational purposes. They may be deleted from the deployed
+#	configuration without impacting the operation of the server.
+#
+
+# Ldap auth
+DEFAULT     Auth-Type := ldap
+
+#
+# Deny access for a specific user.  Note that this entry MUST
+# be before any other 'Auth-Type' attribute which results in the user
+# being authenticated.
+#
+# Note that there is NO 'Fall-Through' attribute, so the user will not
+# be given any additional resources.
+#
+#lameuser	Auth-Type := Reject
+#		Reply-Message = "Your account has been disabled."
+
+#
+# Deny access for a group of users.
+#
+# Note that there is NO 'Fall-Through' attribute, so the user will not
+# be given any additional resources.
+#
+#DEFAULT	Group == "disabled", Auth-Type := Reject
+#		Reply-Message = "Your account has been disabled."
+#
+
+#
+# This is a complete entry for "steve". Note that there is no Fall-Through
+# entry so that no DEFAULT entry will be used, and the user will NOT
+# get any attributes in addition to the ones listed here.
+#
+#steve	Cleartext-Password := "testing"
+#	Service-Type = Framed-User,
+#	Framed-Protocol = PPP,
+#	Framed-IP-Address = 172.16.3.33,
+#	Framed-IP-Netmask = 255.255.255.0,
+#	Framed-Routing = Broadcast-Listen,
+#	Framed-Filter-Id = "std.ppp",
+#	Framed-MTU = 1500,
+#	Framed-Compression = Van-Jacobsen-TCP-IP
+
+#
+# The canonical testing user which is in most of the
+# examples.
+#
+#bob	Cleartext-Password := "hello"
+#	Reply-Message := "Hello, %{User-Name}"
+#
+
+#
+# This is an entry for a user with a space in their name.
+# Note the double quotes surrounding the name.  If you have
+# users with spaces in their names, you must also change
+# the "filter_username" policy to allow spaces.
+#
+# See raddb/policy.d/filter, filter_username {} section.
+#
+#"John Doe"	Cleartext-Password := "hello"
+#		Reply-Message = "Hello, %{User-Name}"
+
+#
+# Dial user back and telnet to the default host for that port
+#
+#Deg	Cleartext-Password := "ge55ged"
+#	Service-Type = Callback-Login-User,
+#	Login-IP-Host = 0.0.0.0,
+#	Callback-Number = "9,5551212",
+#	Login-Service = Telnet,
+#	Login-TCP-Port = Telnet
+
+#
+# Another complete entry. After the user "dialbk" has logged in, the
+# connection will be broken and the user will be dialed back after which
+# he will get a connection to the host "timeshare1".
+#
+#dialbk	Cleartext-Password := "callme"
+#	Service-Type = Callback-Login-User,
+#	Login-IP-Host = timeshare1,
+#	Login-Service = PortMaster,
+#	Callback-Number = "9,1-800-555-1212"
+
+#
+# user "swilson" will only get a static IP number if he logs in with
+# a framed protocol on a terminal server in Alphen (see the huntgroups file).
+#
+# Note that by setting "Fall-Through", other attributes will be added from
+# the following DEFAULT entries
+#
+#swilson	Service-Type == Framed-User, Huntgroup-Name == "alphen"
+#		Framed-IP-Address = 192.0.2.65,
+#		Fall-Through = Yes
+
+#
+# If the user logs in as 'username.shell', then authenticate them
+# using the default method, give them shell access, and stop processing
+# the rest of the file.
+#
+#DEFAULT	Suffix == ".shell"
+#		Service-Type = Login-User,
+#		Login-Service = Telnet,
+#		Login-IP-Host = your.shell.machine
+
+
+#
+# The rest of this file contains the several DEFAULT entries.
+# DEFAULT entries match with all login names.
+# Note that DEFAULT entries can also Fall-Through (see first entry).
+# A name-value pair from a DEFAULT entry will _NEVER_ override
+# an already existing name-value pair.
+#
+
+# Sample defaults for all framed connections.
+#
+#DEFAULT	Service-Type == Framed-User
+#	Framed-IP-Address = 255.255.255.254,
+#	Framed-MTU = 576,
+#	Service-Type = Framed-User,
+#	Fall-Through = Yes
+
+#
+# Default for PPP: dynamic IP address, PPP mode, VJ-compression.
+# NOTE: we do not use Hint = "PPP", since PPP might also be auto-detected
+#	by the terminal server in which case there may not be a "P" suffix.
+#	The terminal server sends "Framed-Protocol = PPP" for auto PPP.
+#
+DEFAULT	Framed-Protocol == PPP
+	Framed-Protocol = PPP,
+	Framed-Compression = Van-Jacobson-TCP-IP
+
+#
+# Default for CSLIP: dynamic IP address, SLIP mode, VJ-compression.
+#
+DEFAULT	Hint == "CSLIP"
+	Framed-Protocol = SLIP,
+	Framed-Compression = Van-Jacobson-TCP-IP
+
+#
+# Default for SLIP: dynamic IP address, SLIP mode.
+#
+DEFAULT	Hint == "SLIP"
+	Framed-Protocol = SLIP
+
+#
+# Last default: rlogin to our main server.
+#
+#DEFAULT
+#	Service-Type = Login-User,
+#	Login-Service = Rlogin,
+#	Login-IP-Host = shellbox.ispdomain.com
+
+# #
+# # Last default: shell on the local terminal server.
+# #
+# DEFAULT
+# 	Service-Type = Administrative-User
+
+
+# On no match, the user is denied access.
+
+
+#########################################################
+# You should add test accounts to the TOP of this file! #
+# See the example user "bob" above.                     #
+#########################################################
+
@@ -0,0 +1 @@
+../mods-available/ldap
Author	SHA1	Message	Date
didinst	cd8b93d2e6	Ldap auth ok	2025-07-21 00:45:54 +03:00
didinst	a03f58e358	Almost work and disable EAP	2025-07-20 15:58:54 +03:00
didinst	ca7cea290b	Move and regenerate dev keys	2025-07-19 21:09:14 +03:00
didinst	b90858bd32	Initial ldap and radius configs	2025-07-19 17:01:59 +03:00
didinst	b6749b2785	Fix ipv6	2024-12-15 16:33:42 +03:00
didinst	7cd8e20405	Refactor stream proxy	2024-12-15 13:57:57 +03:00
didinst	a4a7bf0187	Tested with mikrotik ok	2024-12-15 03:26:02 +03:00
didinst	7a2079e3ef	Nginx frontend in stream mode, client cert based auth to connect sstp server	2024-12-14 23:34:27 +03:00